Mahadev Computers

• 48 x 10/100/1000BASE-T ports
• 4 x Gigabit GbE/SFP combo ports
• Advanced L2 switching and security features
• L2+ Static Routing
• Optional “standard mode” or “surveillance mode” management user interface

• 4 x 10/100/1000BASE-T ports
  
• 4 x 10G SFP+ ports for choosing the most suitable media type for your requirement
  
• Lite L3 Static Routing for increased network efficiency
• Advanced security features such as Access Control List, IMPB, 802.1X Authentication to enhance network security and protect the internet IT network
• Dual Image & Configuration for reduced downtime
• Supports STP/RSTP/MSTP to maintain the quality of network
• Full CLI for for easy management
• QoS Enablement for performance improvement of critical network traffic
• 11 Web Languages for management flexiblity

• 24 10/100/1000 Mbps gigabit ethernet ports
• 2 SFP port
• 250watts available PoE
• Flow control for protection against loss data
• Maximum distance of 250m
• Light protection (6kV)
• Operating Temperature: 0 to 40 deg C (32 to 104 deg F)

1. 8 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
2. IEEE 802.3at/af standard for PoE ports.
3. Network topology management, alarm push, network health monitor.
4. 6 KV surge protection for PoE ports.
5. AF/AT camera can reach up to 300 m in extend mode.
6. PoE watchdog to auto detect and restart the cameras that do not respond.
7. Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.

1. 16 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
2. IEEE 802.3at/af standard for PoE ports.
4. Network topology management, alarm push, network health monitor.
6. 6 KV surge protection for PoE ports.
8. AF/AT camera can reach up to 300 m in extend mode.
10. PoE watchdog to auto detect and restart the cameras that do not respond.
13. Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.

1. 8 × 10/100Mbps PoE ports, and and 2 × Gigabit RJ45 port.
2. IEEE 802.3at/af standard for PoE ports (Max. 60 W PoE output).
3. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab standard.
4. 6 KV surge protection for PoE ports.
5. Up to 300 m long-range transmission.
6. Wire-speed forwarding.
7. Store-and-forward switching.
8. Solid high-strength metal shell.
9. Reliable fan-free design

1.  4 × 100 Mbps PoE RJ45 ports, 1 × 100 Mbps network RJ45 port. • IEEE 802.3at/af standard for PoE ports. • Network topology management, alarm push, network health monitor. • 6 KV surge protection for PoE ports. • AF/AT camera can reach up to 300 m in extend mode.

1. 6 × 100M PoE ports, 2 × Hi-PoE port, 1 × gigabit RJ45 port and 1 × gigabit SFP fiber optical port.
2. IEEE 802.3at/af/bt standard for Hi-PoE ports (Max. 90 W PoE output).
3. IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output).
4. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab standard.
5. 6 KV surge protection for PoE ports.
6. PoE output power management.
7. Up to 300 m long-range transmission.
8. PoE watchdog to auto detect and restart the cameras that do not respond.
9. Port isolation to improve network security.
10. Wider temperature (-30 to 65 °C) access design.

1. 3 × 100M PoE ports, 1 × Hi-PoE port, 1 × gigabit RJ45 port and 1 × gigabit SFP Fiber Optical Port.
2. IEEE 802.3at/af/bt standard for Hi-PoE port (Max. 60 W PoE output).
3. IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output).
4. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab standard.
5. 6 KV surge protection for PoE ports.
6. Up to 300 m long-range transmission.
7. PoE watchdog to auto detect and restart the cameras that do not respond.
8. Port isolation to improve network security.
9. Wire-speed forwarding.
10. Wider temperature (-30 to 65 °C) design.
11. Store-and-forward switching.
12. Solid high-strength metal shell.
13. Reliable fan-free design.

1. • Up to 3 km wireless transmission distance • 150 Mbps 802.11n wireless • Built-in 12 dBi high gain antenna • Point-to-Point, Point-to-Multipoint • Passive PoE power supply for easy installation DS-3WF01C-2N/O • Power Adapter (12V, 1A) • PoE Injector • Pole Mounting Straps • Quick Start Guide

1. 5 Port Fast Ethernet Unmanaged Desktop Switch

1.  5 x 10/100 Mbps ethernet ports
2.  Supports ADI/ADIX
3.  Store-and-forward switching
4.  Supports MAC address auto-learning and aging
5.  Simple, compact body design
6.  Supports desktop and wall-mounting
7. Plug & play, easy to use.
8. Add to Favorites

1. 4 Port Fast Ethernet Unmanaged POE Switch

1.  4 x 10/100Mbps PoE ports, and and 2 × 10/100Mbps RJ45 ports.
2.  IEEE 802.3at/af standard for PoE ports (Max. 35 W PoE output).
3.  IEEE 802.3, IEEE 802.3u, and IEEE 802.3x standard.
4.  6 KV surge protection for PoE ports.
5.  Up to 300 m long-range transmission.
6. Wire-speed forwarding.
7. Store-and-forward switching.
8. Solid high-strength metal shell.
9. Reliable fan-free design.

1. Intelligent PoE Management. When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime.
2. Up to 300 m Long Range PoE Transmission. The distance between IPCs and switch can reach maximum 300 meters.
3. 4/8-Core Adaptive Power Supply with Less Power Loss. 8-core power supply reduces the power loss on cables.
4. 6KV Surge Protection to Improve Reliability in Harsh Environment. The built-in surge protection device protects the switch from the sudden lightning surge in harsh environment.
5. Design for Video Transmission. VIP port ensures important data transmission when network congestion occurs.

1. Intelligent PoE Management. • When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime. Up to 300 m Long Range PoE Transmission. • The distance between IPCs and switch can reach maximum 300 meters. 4/8-Core Adaptive Power Supply with Less Power Loss. • 8-core power supply reduces the power loss on cables. 6KV Surge Protection to Improve Reliability in Harsh Environment. • The built-in surge protection device protects the switch from the sudden lightning surge in harsh environment. Design for Video Transmission. • VIP port ensures important data transmission when network congestion occurs.

1. Intelligent PoE Management: When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime.
2. Up to 300 m Long Range PoE Transmission: The distance between IPCs and switch can reach maximum 300 meters.
3. 4/8-Core Adaptive Power Supply with Less Power Loss: 8-core power supply reduces the power loss on cables.
4. 6KV Surge Protection to Improve Reliability in Harsh Environment: The built-in surge protection device protects the switch from the sudden lightning surge in harsh environment.
5. Design for Video Transmission: VIP port ensures important data transmission when network congestion occurs.

1. 3 × gigabit PoE ports, 1 × gigabit Hi-PoE port, 2 × gigabit SFP fiber optical ports.
2. IEEE 802.3at/af/bt standard for Hi-PoE port (Max. 60 W PoE output).
3. IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output).
4. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab standard.
5. 6 KV surge protection for PoE ports.
6. Up to 300 m long-range transmission.
7. PoE watchdog to auto detect and restart the cameras that do not respond.
8. Port isolation to improve network security.
9. Wire-speed forwarding.
10. Wider temperature (-30 to 65 °C) design.
11. Store-and-forward switching.

1.  Comply with IEEE802.3, IEEE802.3u, IEEE802.3X standards.
2.  4*10/100 Base-TX Ethernet ports (Data/Power), 2*10/100 Base-T Ethernet ports.
3.  1K MAC address and MAC address auto learning.
4.  IEEE 802.3x full-duplex flow control and half-duplex backpressure flow control.
5.  1.2 Gbps non-blocking wire-speed forwarding backplane bandwidth.
6.  The maximum output power of a single PoE port: 30 W, the maximum output power of PoE of the whole machine: 50W.
7.  Support 250m network extension, 1-2 ports are high priority ports.
8.  Desktop and wall-mounted design, plug and play.

1.  Conforms to IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards.
2.  8*10/100/1000 Base-T Ethernet ports (Data/Power), 2*10/100/1000 Base-T Ethernet ports (Data).
3.  4K MAC address and MAC address auto learning.
4.  IEEE 802.3x full-duplex flow control and half-duplex backpressure flow control.
5.  20 Gbps non-blocking wire-speed forwarding backplane bandwidth.
6.  The maximum output power of a single PoE port: 30 W, the maximum output power of PoE of the whole machine: 95 W.
7.  Standard sharing, VLAN isolation dual-mode switching, 1-2 ports are priority ports.
8.  Support multiple installation methods such as desktop and wall-mounted, plug and play

1. ● 8*10/100 Mbps auto-negotiation RJ45 ports obtains the fastest possible connection
2. ● Compliant with IEEE802.3，IEEE802.3u，IEEE802.3X standard
3. ● 8* LED indicators display the connection status
4. ● Supports10/100M full duplex and half duplex
5. ● Store-and-forward mode
6. ● Supports MAC address auto learning and auto aging
7. ● Supports to connect with IP-camera
8. ● Plug-and-play without configuration
9. ● Supports wall-mounting and desktop installation Energy saving technologies help you save power and money

1. 24 10/100 Mbps Base-TX RJ45 port; 1 10/100/1000 Mbps Base-T RJ45 port; 1 100/1000Base-X SFP port.
2. TEF1126P-24-250W 24 10/100Mbps +1 Gigabit/SFP Slots Switch With 24-Port PoE 01
3. Products Description Gigabit Uplink Unmanaged PoE Switch Ports 1-24:
4. IEEE 802.3af/at PoE ports; maximum power output of each PoE port: 30 W; maximum power output of the switch: 225 W. 
5. 13-inch desktop size, 1U height, rack mountable. Hardware DIP switch for selection among the CCTV, Standard, VLAN, and Extend modes.
6. The Extend mode features 1-8 port transmission distance of up to 250m at 10 Mbps
7. .Hardware DIP switch to isolate ports to prevent broadcast storm and defend against DHCP spoofing

1.  8 PoE Ports to power connected devices for flexible network deploymentSupportsIEEE802.3af/atPoEstandardandbecompatiblewithPDssuchasAPs,IP Cameras or IP Phones, etc.•••Professional lightning protection circuitfor all port1-8portsupportsIEEE802.3afPoE(15.4W)or802.3atPoE+(30W)power supply,autodetectandrecognizeIEEE802.3afPoEdevicetopower,single portPoEpowerupto30W;Supportportprioritypowersupplyandpower overloadprotection,ifthetotalpoweroverPoEbudget,systemlaunch Enhanced Ethernet PoE+ function 9-Port gigabit & large packet buerHigh-reliabilityIntegratingprofessionallightning-proofcircuit,supportingalllportsecondarylightning-proof.ToprovideenhancedreliabilityEthernettechnology,enhancerobustnessandreliabilityoftheuser network structure.Up to 2000Mbps full duplex bandwidth capability for high speed data processing ••16K entry MAC address table of the PoE switch with auto-learning and auto-aging•Supports IEEE  

1.  Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x and IEEE802.3af/at standards.
2.  16 * 100/1000 Mbps Base-T RJ45 ports for data transmission and power supply, 2* 1000 Mbps Base-X SFP slot.
3.  8 K MAC address table and MAC address auto-learning.
4.  IEEE 802.3x-compliant full-duplex flow control and half-duplex backpressure flow control.
5.  36 Gbps backplane bandwidth.
6.  Maximum power consumption of a single port: 30W; Maximum power consumption of the switch: 250W.
7.  4 modes: standard, priority, extend and VLAN

1. Comply with IEEE 802.3, IEEE 802.3u, IEEE 802.
2. 3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1d, IEEE 802
3. .1s, IEEE 802.3af/at standards 24 x 10/100/1000 Base-T Ethernet ports (Data/Power), 4 separate 1000 Base-X SFP ports 16 K MAC
4. address table and MAC address auto-learning Maximum PoE output power of a single port:
5. 30 W, maximum PoE output power of the whole switch: 370 W Supports abundant services,
6. such as static routing, VLAN, IGMP, QoS, ACL, DHCP Snooping, ARP and Telnet Built-in 6 kV
7. professional lightning protection power, 19 inch/1 u standard rack-mounted desig

• INSIGHT CLOUD MANAGEMENT SOLUTION: 1-Year Insight Subscription Included
• ETHERNET PORT CONFIGURATION: 16 Gigabit ports
• POWER-OVER-ETHERNET: 16 PoE+ ports with 300W total power budget
• FLEXIBILITY FROM UPLINK PORTS: 2 x 1G SFP ports

• ETHERNET PORT CONFIGURATION: 24 Gigabit metal ports
• PLUG-AND-PLAY: Simple set up with no software to install or configuration needed
• VERSATILE MOUNTING OPTIONS: Supports desktop, wall or rackmount placement, and includes all the necessary mounting hardware in the box
• SILENT OPERATION: The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments

1.  Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, I EEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1d, and IEEE 802.1s standards.
2.  10/100/1000Base-T Ethernet port x 24, Independent 1000Base-X SFP port x 4.
3.  16K MAC address table and MAC address auto-learning.
4.  12M large buffer.
5.  Supports multiple services, such as VLAN, IGMP, QoS, ACL, DHCP Snooping, and Telnet.
6.  Equipped with a built-in 6 kV professional lightning protection power and a 19-inch/1 U rack-mounted shel

• 16 10/100 Mbps Ethernet PoE ports
• 1 Gigabit and 1 Combo Uplink
• 150watts available PoE
• Flow control for protection against data loss
• 9th-16th port support 500 meters long distance transmission with speed 100 Mbps
• DPE-500-E – PoE Splitter to be used for 500m (To be bought separately
• Light protection 6KV
• Operating Temperature: 0 to 50 deg C

1.  8 10/100BASE-TX RJ45 ports, 2 10/100/1000BASE-T RJ45 ports ;
2.  6KV lightning protection;
3.  Up to 8 ports of IEEE 802.3af/802.3at devices powered;
4.  Supports PoE Power up to 30.8 watts for each PoE port;
5.  Each port supports 51V DC power to PoE Powered Device;
6.  99-watt PoE budget;
7.  Extend Ethernet mode with 250m transmission distance;
8.  Plug and play design, no configuration required;

• _{Auto Negotiation of speed and duplex modes}
• _{IEEE 802.3x Flow Control}
• _{Dynamic MAC address management}
• _{IEEE 802.1Q-based VLAN}
• _{Auto Voice VLAN}
• _{Auto Video VLAN (selected models)}
• _{VLAN routing (selected models)}
• _{QoS based on WRR, strict priority, or both}
• _{Port-based and IEEE 801.2p-based QoS}
• _{TCP/UDP-based QoS}
• _DiffServ
• _{IPv4 and IPv6-based QoS}
• _{DSCP Support}
• _{Rate Limiting (egress only)}
• _{Link Aggregation and LACP}

• 16 10/100/1000 Mbps gigabit ethernet ports
• 2 SFP port
• 150watts available PoE
• Flow control for protection against data loss
• Maximum distance of 250m
• Light protection (6kV)
• Operating Temperature: 0 to 40 deg C (32 to 104 deg F)

^{The NETGEAR Gigabit Unmanaged Switch series helps businesses cost-effectively expand their network to Gigabit speeds and higher port counts. These unmanaged Gigabit switches come in a wide range of models including desktop, wall-mount and rackmount form factors and 5 to 24 port configurations.}

^{They are energy efficient, built to last, and rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization and jumbo frame support allow for seamless integration with more sophisticated networks.}

• Smart Managed Plus Switch delivers network monitoring, traffic prioritization and VLAN
• Up to 48 ports (depending on model) deliver up to 2000 Mbps of dedicated, non-blocking bandwidth per port
• Simple, yet useful network set-up on top of plug-and-play connectivity
• Gigabit speed with QoS, VLAN and network monitoring
• VLAN support for traffic segmentation
• Quality of Service (QoS) for traffic prioritization
• Auto “denial-of-service” (DoS) prevention
• Troubleshoot connection issues via cable test
• Loop prevention and broadcast storm controls
• IGMP snooping v1, v2 and v3 support for multicast optimization
• Rate limiting for better bandwidth allocation
• Port mirroring for network monitoring
• Jumbo frame support
• Port Trunking to increase bandwidth and provide redundant links

• _{Auto Negotiation of speed and duplex modes}
• _{IEEE 802.3x Flow Control}
• _{Dynamic MAC address management}
• _{IEEE 802.1Q-based VLAN}
• _{Auto Voice VLAN}
• _{Auto Video VLAN (selected models)}
• _{VLAN routing (selected models)}
• _{QoS based on WRR, strict priority, or both}
• _{Port-based and IEEE 801.2p-based QoS}
• _{TCP/UDP-based QoS}
• _DiffServ
• _{IPv4 and IPv6-based QoS}
• _{DSCP Support}
• _{Rate Limiting (egress only)}
• _{Link Aggregation and LACP}

• _{Auto Negotiation of speed and duplex modes}
• _{IEEE 802.3x Flow Control}
• _{Dynamic MAC address management}
• _{IEEE 802.1Q-based VLAN}
• _{Auto Voice VLAN}
• _{Auto Video VLAN (selected models)}
• _{VLAN routing (selected models)}
• _{QoS based on WRR, strict priority, or both}
• _{Port-based and IEEE 801.2p-based QoS}
• _{TCP/UDP-based QoS}
• _DiffServ
• _{IPv4 and IPv6-based QoS (selected models)}
• _{DSCP Support}
• _{Rate Limiting (ingress, or egress)}
• _{Link Aggregation and LACP}

• _{Auto Negotiation of speed and duplex modes}
• _{IEEE 802.3x Flow Control}
• _{Dynamic MAC address management}
• _{IEEE 802.1Q-based VLAN}
• _{Auto Voice VLAN}
• _{Auto Video VLAN (selected models)}
• _{VLAN routing (selected models)}
• _{QoS based on WRR, strict priority, or both}
• _{Port-based and IEEE 801.2p-based QoS}
• _{TCP/UDP-based QoS}
• _DiffServ
• _{IPv4 and IPv6-based QoS}
• _{DSCP Support}
• _{Rate Limiting (egress only)}
• _{Link Aggregation and LACP}